Hiking Boot Studs | Grip Studs® Screw-In Tire Studs | Traction in Ice, Snow and Dirt | Boot Studs

Helpful Tips
When installing Grip Studs® with the Grip Studs® driver tool, ensure the prongs on your tool are firmly seated in the notches in the studs. If the tool is not seated all the way in the stud, torque pressure can cause the installation tool to break. Grip Studs® tools are not designed to be used with impact drivers.

Home | Footwear Studs | Hiking Boot
boot
Boot Studs

Transform your boots with Grip Studs® to secure traction while working, hiking, hunting and trekking! This useful boot stud with its stay–in wide auger design will deliver dependable traction in even the most treacherous outdoor conditions. Grip Studs® have a solid tungsten carbide shaft that delivers durable performance and are easy to install or remove with the manual or power tool. GripStuds® offers varying stud depths that can work in virtually any sole. Also with a variety of prominences, you can customize your footwear for any task including outdoor work, on the job, in the woods, on a hike or around the home.
Read customer reviews here

1, 2, 3 Easy Ordering Steps
1 Select Studs! Select from the recommended stud(s) below. You can also refer to our Stud Selection Guide to help aid in your selection.

1 Select Tools! Select corresponding installation and removal tools. More about tools.

1 Submit Order! Place your order in our secure shopping cart! Studs ship out same day if ordered before 12:30p.m. PST, Mon-Fri excepting holidays.
Recommended Stud Options
Number of Studs per Pair of Boots: 20 (10 per Sole)
smdiv

#1100 Boot Stud
Technical Info
Prominence from Sole: 1.9 mm
Penetration into Sole: 7.9 mm

Boot Kit, 20 Studs with Manual Install Tool: $35.35



Bulk Pack of 20 Studs: $23.40
Does not include install tool.
This product requires a tool!


Bulk Pack of 100 Studs:$99.95
Does not include install tool.
This product requires a tool!


Tools for #1100



#4100 Power Install Tool: $9.95
Requires cordless drill.

#5000 Manual Driver Handle $1.95

smdiv

#3000B Boot Stud
Technical Info
Prominence from Sole: 3.5 mm
Penetration into Sole: 7.9 mm

Boot Kit, 20 Studs with Manual Install Tool: $35.35



Bulk Pack of 20 Studs: $23.40
Does not include install tool.

This product requires a tool!

Bulk Pack of 100 Studs:$99.95
Does not include install tool.

This product requires a tool!

Tools for #3000B



#4100 Power Install Tool: $9.95
Requires cordless drill.

#5000 Manual Driver Handle $1.95

smdiv

#3000A Boot Stud
Technical Info
Prominence from Sole: 4.4 mm
Penetration into Sole: 10.7 mm

Boot Kit, 20 Studs with Manual Install Tool: $35.35



Bulk Pack of 20 Studs: $23.40
Does not include install tool.
This product requires a tool!


Bulk Pack of 100 Studs:$99.95
Does not include install tool.
This product requires a tool!


Tools for #3000A



#4100 Power Install Tool: $9.95
Requires cordless drill.

#5000 Manual Driver Handle $1.95

smdiv

boot

INSTALLATION INSTRUCTIONS: Always check boot sole depth before installing Grip Studs.® Grip Studs® boot studs can be installed with the Grip Studs® manual driver tool or with the Grip Studs® power bit in a variable speed drill. Snap a stud into the tip of the install tool (auger end facing outward). Position the end of the stud firmly against a thick knob of the boot sole. Firmly apply pressure straight down while slowly screwing the stud into the sole until the prongs on the tool penetrate the rubber. Remove the tool from the stud. The notched collar on the stud should be flush with the rubber. Studs may come out if they are not adequately sunk into the rubber. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the sole so the studs can make better contact with the terrain. Grip Studs® are also easily removed by backing them out with the same tool. CAUTION: Over-tightening may cause studs to penetrate entirely through boot soles; verify sole thickness before installing studs. Studs may damage or mar floors, truck beds and other surfaces.
HOME CONTACT US VIEW SHOPPING CART COPYRIGHT© 2012 GRIP STUDS® Merlin OR 97532 USA 541-476-1928 |SiteLock
The free script slideshow was provided by JavaScript Kit