Surf Fishing Studs | Grip Studs® Screw-In Tire Studs | Traction in Ice, Snow and Dirt

Helpful Tips
When installing Grip Studs® with the Grip Studs® driver tool, ensure the prongs on your tool are firmly seated in the notches in the studs. If the tool is not seated all the way in the stud, torque pressure can cause the installation tool to break. Grip Studs® tools are not designed to be used with impact drivers.

Home | Footwear Studs | Surf Fishing Studs
Surf Fishing Studs
Secure your footing on slimy weed covered rocks and in heavy surf with Grip Studs® high performance boot studs. These durable traction studs with their unique wide–auger shank do not bend, back-out or fold over in the sole like other narrow-threaded studs. Grip Studs® feature a tough, solid tungsten carbide core-to-tip shaft and a rust-resistant finish, making them the perfect stud for rock hoppers! The unique installation notches of the Grip Studs® design ensure easy installation and removal with the handy power tool. Grip Studs® surf fishing studs work in almost any rubber or felt sole and are available in both aggressive and standard sizes ensuring compatibility with your boot sole and optimizing traction based on your surf fishing conditions.
Read customer reviews here

1, 2, 3 Easy Ordering Steps
1 Select Studs! Select from the recommended stud(s) below. You can also refer to our Stud Selection Guide to help aid in your selection.

1 Select Tools! Select corresponding installation and removal tools. More about tools.

1 Submit Order! Place your order in our secure shopping cart! Studs ship out same day if ordered before 12:30p.m. PST, Mon-Fri excepting holidays.
Recommended Stud Options
Number of Studs per Pair of Boots: 50 (25 per boot)
smdiv

#1800 Boot Stud
Technical Info
Prominence from Tire: 6.8 mm
Penetration into Tire: 16.5 mm

Boot Kit, 50 Studs with Power Install Tool: $79.95


Pack of 50 Studs: $70.00
Does not include install tool.

This product requires a tool!

Pack of 100 Studs: $119.95

This product requires a tool!

Pack of 150 Studs: $177.95

This product requires a tool!

Carton of 1,000 Studs: $1140.00

This product requires a tool!


Tools for #1800

#4800 Install Tool: $9.95
Requires cordless drill

smdiv

#1500 Boot Stud
Technical Info
Prominence from Tire: 4 mm
Penetration into Tire: 13.5 mm

Boot Kit, 50 Studs with Power Install Tool: $74.95


Bulk Pack of 50 Studs: $65.00
Does not include install tool.

This product requires a tool!

Pack of 100 Studs: $109.95

This product requires a tool!

Pack of 150 Studs: $162.95

This product requires a tool!

Carton of 1,000 Studs: $1045.00

This product requires a tool!


Tools for #1500

#4500 Install Tool: $9.95
Requires cordless drill

smdiv


INSTALLATION INSTRUCTIONS: Always check boot sole depth before installing Grip Studs.™ Grip Studs™ boot studs can be installed with the  Grip Studs™ power bit in a variable speed drill. Snap a stud into the tip of the install tool (auger end facing outward). Position the end of the stud firmly against the boot sole. Steadily apply pressure straight down while slowly screwing the stud into the sole until the prongs on the tool penetrate the surface of the sole. Remove the tool from the stud. The notched collar on the stud should be flush with the boot sole. Studs may come out if they are not adequately sunk into the sole. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the sole so the studs can make better contact with the terrain. Grip Studs™ are also easily removed by backing them out with the same tool. CAUTION: Over-tightening may cause studs to penetrate entirely through boot soles; verify sole thickness before installing studs. Studs may damage or mar floors, truck beds and other surfaces.
HOME CONTACT US VIEW SHOPPING CART COPYRIGHT© 2012 GRIP STUDS® Merlin OR 97532 USA 541-476-1928 |SiteLock
The free script slideshow was provided by JavaScript Kit