Grip Studs™ Screw-In Tire Studs | Traction in Ice, Snow and Dirt

New Boot Studs!
Saltwater Surf
Fishing Studs
Great for striped bass fishing!

Featured Video

Helpful Tips

When installing Grip Studs™ with the Grip Studs™ driver tool, ensure the prongs on your tool are firmly seated in the notches in the studs. If the tool is not seated all the way in the stud, torque pressure can cause the installation tool to break. Grip Studs™ tools are not designed to be used with impact drivers.

Home |Select a Stud

Grip Studs™
Stud Selection Guide

Choose from Grip Studs™ wide selection of versatile screw–in tire studs that customize your tires for use on ice, snow, mud or frozen pavement. Grip Studs™ wide–auger thread stays put like no other stud on the market and installs easily with a cordless drill and handy installation tool. Its solid tungsten carbide shaft delivers unbelievable traction when and where you need it.

Our recommendations below are based on our experience and are not guaranteed to work for your particular application. Always check your tire/sole tread depth before purchasing or installing studs. Questions about your particular application? Give us a call toll-free at 855-538-7883 or 541-476-1928 Monday - Friday, 9am - 5pm PST.

Select a Stud Pack to Add to Cart
100pk $99.95-$119.95
150pk $147.95-$177.95

Grip Studs™

#1000 100pk Buy 150pk Buy

#1100 100pk Buy 150pk Buy

#1200 100pk Buy 150pk Buy

#1300 100pk Buy 150pk Buy

#1500 100pk Buy 150pk Buy

#1600 100pk Buy 150pk Buy

#1740 100pk Buy

$147.95

150pk Buy

$147.95

#1800 100pk Buy

$147.95

150pk Buy

$147.95

#1800R 100pk Buy

$147.95

150pk Buy

$147.95

#1900T 100pk Buy

$147.95

150pk Buy

$147.95

#3000A 100pk Buy

$99.95

150pk Buy

$147.95

#3000B 100pk Buy

$99.95

150pk Buy

$147.95

Don't forget an install tool.

INSTALLATION INSTRUCTIONS: Always check tire tread depth before installing Grip Studs™. Attach install tool to variable speed drill. Snap a stud into the tip of the install tool. Position stud firmly against a thick knob of the tire tread. Firmly apply pressure straight down while slowly screwing the stud into the tire until the prongs on the tool are buried into the rubber. Remove the tool from the stud. The notched collar on the stud should be flush with the rubber. Studs may come out if they are not adequately sunk into the rubber. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the tread so the studs can make better contact with the terrain. Grip Studs™ are also easily removed by backing them out with the sturdy OFF/OFF1 removal tool. Caution: Studs may damage or mar floors, truck beds and other surfaces.

HOME

VIEW SHOPPING CART

The free script slideshow was provided by JavaScript Kit