Wader Boot Studs | Hiking Boot Studs | Grip Studs® Screw-In Tire Studs | Traction in Ice, Snow and Dirt | Wader Studs

Helpful Tips
When installing Grip Studs® with the Grip Studs® driver tool, ensure the prongs on your tool are firmly seated in the notches in the studs. If the tool is not seated all the way in the stud, torque pressure can cause the installation tool to break. Grip Studs® tools are not designed to be used with impact drivers.

Home | Footwear Studs | Wader Boots
Wader Boot Studs

Secure your footing in slippery, treacherous waters and rocky shores with Grip Studs® high performance wader boot studs. These durable traction studs with their unique wide–auger design stay put—unlike sheet metal screws which can work their way in or out of your soles—and their solid tungsten carbide core-to-tip shaft makes them extra tough against wear. Grip Studs® unique installation notches ensure easy installation and removal with the handy Grip Studs® manual or power tools. Grip Studs® work in almost any rubber sole, and their varying protrusions customize traction for moderate to aggressive fishing conditions in rivers or jetties with rocks, mud or slime.
Read customer reviews here

Learn more about Grip Studs® wader studs at waderstuds.com.
1, 2, 3 Easy Ordering Steps
1 Select Studs! Select from the recommended stud(s) below. You can also refer to our special web site, waderstuds.com , to help aid in your selection.

1 Select Tools! Select corresponding installation tool. More about tools.

1 Submit Order! Place your order in our secure shopping cart! Studs ship same day if ordered before 12:30 p.m. PST, Mon- Fri, excepting holidays.
Recommended Stud Options
Number of Studs per Pair of Boots: 20 (10 per Sole)
smdiv

#1100 Wader Stud
Technical Info
Prominence from Sole: 1.9 mm
Penetration into Sole: 7.9 mm

Wader Kit, 20 Studs with Manual Install Tool: $35.35



Bulk Pack of 20 Studs: $23.40
Does not include install tool.
This product requires a tool!


Bulk Pack of 100 Studs:$99.95
Does not include install tool.
This product requires a tool!


Tools for #1100


#4100 Power Install Tool: $9.95
Requires cordless drill.

#5000 Manual Driver Handle $1.95

smdiv

#3000B Wader Stud
Technical Info
Prominence from Sole: 3.5 mm
Penetration into Sole: 7.9 mm

Wader Kit, 20 Studs with Manual Install Tool: $35.35



Bulk Pack of 20 Studs: $23.40
Does not include install tool.

This product requires a tool!

Bulk Pack of 100 Studs:$99.95
Does not include install tool.

This product requires a tool!

Tools for #3000B


#4100 Power Install Tool: $9.95
Requires cordless drill.

#5000 Manual Driver Handle $1.95

smdiv


INSTALLATION INSTRUCTIONS: Always check boot sole depth before installing Grip Studs.® Grip Studs® boot studs can be installed with the Grip Studs® manual driver tool or with the Grip Studs® power bit in a variable speed drill. Snap a stud into the tip of the install tool (auger end facing outward). Position the end of the stud firmly against a thick knob of the boot sole. Firmly apply pressure straight down while slowly screwing the stud into the sole until the prongs on the tool penetrate the rubber. Remove the tool from the stud. The notched collar on the stud should be flush with the rubber. Studs may come out if they are not adequately sunk into the rubber. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the sole so the studs can make better contact with the terrain. Grip Studs® are also easily removed by backing them out with the same tool. CAUTION: Over-tightening may cause studs to penetrate entirely through boot soles; verify sole thickness before installing studs. Studs may damage or mar floors, truck beds and other surfaces.
HOME CONTACT US VIEW SHOPPING CART COPYRIGHT© 2012 GRIP STUDS® Merlin OR 97532 USA 541-476-1928 |SiteLock
The free script slideshow was provided by JavaScript Kit