When installing Grip Studs® with the Grip Studs® driver tool, ensure the prongs on your tool are firmly seated in the notches in the studs. If the tool is not seated all the way in the stud, torque pressure can cause the installation tool to break. Grip Studs® tools are not designed to be used with impact drivers.
Grip Studs® track studs deliver dependable, durable performance all season long! This capable stud with its unique wide–auger design
has holding power like no other screw–in stud. Grip Studs® have a solid tungsten-carbide tip/core and are easy to install with a
cordless drill and handy installation tool.
Grip Studs® varying depths work with many sled tracks in customizing your snowmobile to grip ice, snow, and frozen pavement.
Read customer reviews here
Snowmobile Tracks (Always measure track thickness and clearance first)
6 x 21.8 mm
(from track or tread surface)
(into track or tread surface)
Minimum Tread Depth
Carbide Tip Width
#3200 for Installation & Removal
INSTALLATION INSTRUCTIONS: Always check tire tread depth before installing Grip Studs®. Attach install tool to variable speed drill. Snap a stud into the tip of the install tool. Position stud firmly against a thick knob of the tire tread. Firmly apply pressure straight down while slowly screwing the stud into the tire until the prongs on the tool are buried into the rubber. Remove the tool from the stud. The notched collar on the stud should be flush with the rubber. Studs may come out if they are not adequately sunk into the rubber. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the tread so the studs can make better contact with the terrain. Caution: Studs may damage or mar floors, truck beds and other surfaces.