Ice Re-surfacer Studs | Grip Studs® Screw-In Tire Studs | Traction in Ice | Ice Re-Surfacers

Helpful Tips
When installing Grip Studs® with the Grip Studs® driver tool, ensure the prongs on your tool are firmly seated in the notches in the studs. If the tool is not seated all the way in the stud, torque pressure can cause the installation tool to break. Grip Studs® tools are not designed to be used with impact drivers.

Home |Ice Re-Surfacer Studs
Ice Re-Surfacer Studs

Grip Studs® durable tire studs help prevent slippage on the ice all year long, allowing you to safely and efficiently manage your rink. These efficient tire studs with their unique wide–auger design install easily with a cordless drill and stay put like no other screw–in studs on the market. Their solid tungsten carbide core has grabbing power that delivers traction when you need it – no more sliding into the wall!

Read customer reviews here
1, 2, 3 Easy Ordering Steps
1 Select Studs! Select from the recommended stud(s) below. You can also refer to our Stud Selection Guide to help aid in your selection.

1 Select Tools! Select corresponding installation and removal tools. More about tools.

1 Submit Order! Place your order in our secure shopping cart! Studs ship out same day if ordered before 12:30p.m. PST, Mon-Fri excepting holidays.
Recommended Stud Options
Number of Tire Studs for Ice Re-Surfacers:
Per Tire: 50-75

#1400 Tire Stud
Technical Info
Prominence from Tire: 2.8 mm
Penetration into Tire: 13.5 mm

Pack of 100 Studs: $113.25

This product requires a tool!

Pack of 150 Studs: $167.85

This product requires a tool!

Carton of 1,000 Studs: $1076.35

This product requires a tool!

Tools for #1400

#4400 Install Tool: $10.25


INSTALLATION INSTRUCTIONS: Always check tire tread depth before installing Grip Studs®. Attach install tool to variable speed drill. Snap a stud into the tip of the install tool. Position stud firmly against a thick knob of the tire tread. Firmly apply pressure straight down while slowly screwing the stud into the tire until the prongs on the tool are buried into the rubber. Remove the tool from the stud. The notched collar on the stud should be flush with the rubber. Studs may come out if they are not adequately sunk into the rubber. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the tread so the studs can make better contact with the terrain. Caution: Studs may damage or mar floors, truck beds and other surfaces.
The free script slideshow was provided by JavaScript Kit