Snowmobile Studs | Grip Studs® Screw-In Tire Studs | Traction in Ice and Snow | Snowmobile

Helpful Tips
When installing Grip Studs® with the Grip Studs® driver tool, ensure the prongs on your tool are firmly seated in the notches in the studs. If the tool is not seated all the way in the stud, torque pressure can cause the installation tool to break. Grip Studs® tools are not designed to be used with impact drivers.

Home |Snowmobile Studs
Snowmobile Track Studs

Grip Studs® durable snowmobile track studs deliver unbelievable traction, allowing you to ride in even the iciest trails. This stout track stud with its unique wide–auger design installs easily with a cordless drill and stays put like no other screw–in stud. Its solid tungsten carbide shaft has grabbing power guaranteed to help you hook up! Whether you’re looking for better traction while racing or just looking for some winter fun, Grip Studs® are a sure bet for riding on ice, snow or frozen pavement all season long.

Read customer reviews here
1, 2, 3 Easy Ordering Steps
1 Select Studs! Select from the recommended stud(s) below. You can also refer to our Stud Selection Guide to help aid in your selection.

1 Select Tools! Select corresponding installation and removal tools. More about tools.

1 Submit Order! Place your order in our secure shopping cart! Studs ship out same day if ordered before 12:30p.m. PST, Mon-Fri excepting holidays.
Recommended Stud Options
Number of Track Studs for Snowmobiles:
Per Track: Depends on Lug Pattern/Depth

#1610 Track Stud
Technical Info
Prominence from Track: 3.8 mm
Penetration into Track: 18 mm

Pack of 100 Studs: $113.25

This product requires a tool!

Pack of 150 Studs: $167.85

This product requires a tool!

Carton of 1,000 Studs: $1076.35

This product requires a tool!

Tools for #1610

#3200 Install Tool: $10.25


INSTALLATION INSTRUCTIONS: Always check tire tread depth before installing Grip Studs®. Attach install tool to variable speed drill. Snap a stud into the tip of the install tool. Position stud firmly against a thick knob of the tire tread. Firmly apply pressure straight down while slowly screwing the stud into the tire until the prongs on the tool are buried into the rubber. Remove the tool from the stud. The notched collar on the stud should be flush with the rubber. Studs may come out if they are not adequately sunk into the rubber. Repeat procedure for all studs. For optimum traction, install studs in varied pattern (not in a straight line) on the tread so the studs can make better contact with the terrain. Caution: Studs may damage or mar floors, truck beds and other surfaces.
The free script slideshow was provided by JavaScript Kit