Grip Studs Screw-In Tire Studs | Traction in Ice, Snow and Dirt | 1000 Tire Stud

Helpful Tips
When installing Grip Studs® with the Grip Studs® driver tool, ensure the prongs on your tool are firmly seated in the notches in the studs. If the tool is not seated all the way in the stud, torque pressure can cause the installation tool to break. Grip Studs® tools are not designed to be used with impact drivers.

Read Skid Steer Customer Reviews


Track Skid - Pushing Snow

Overall Satisfaction

Stud Performance

Ease of Installation

The ground froze followed by freezing rain. The amount of ice this year in SD is incredible and rendered my tracked steer unusable. After much looking for options I talked to the folks at Grip Studs. They recommended more studs then I had thought but I went with their recommendation and glad I did. It took about 2 hours to install 140 studs on each track. I put the studs to the test even pushing snow uphill on ice and pushed the window tell the tracks spun. At that point I slid down hill about 3 feet and was able to lift the load and climb the hill. Without the studs I would have slid to the bottom, heck I would not have been able to be on the hill in the first place. I can use my track steer again!


Guy P. - Hot Springs, SD - Feb, 2019

Track Skid Steer

Overall Satisfaction

Stud Performance

Ease of Installation

My track skid steer with Grip Studs worked better in all this snow than our tire skid steer with chains. The tracks helped me stay on top of the snow going up the steep driveway, and the studs kept plenty of traction pushing the snow back down the driveway. Good product!


Frank L. - Durham, NY - March, 2015

Track Skid Studs

Overall Satisfaction

Stud Performance

Ease of Installation

We installed 1910 Studs on our track skid steer in February, and they worked very well. We could not have continued work without them. Thanks!


D. Paul - Seven Hills, OH - April, 2015

Track Skid Studs

Overall Satisfaction

Stud Performance

Ease of Installation

I have a tracked skid steer and most of my work is in the timber. The combination of hills, frozen ground and wet leaves made my machine almost useless. I installed 120 1910T studs on each track and have been very happy with the performance. It is amazing what those little studs can do for you. The installation was simple and took me about two hours with a cordless drill. I highly recommend these Gripstuds.


Cliff M. - IL - December, 2018

Track Skid Studs

Overall Satisfaction

Stud Performance

Ease of Installation

We put some 1910T Grip Studs in our track skid steer in December and they worked great. We were able to run all season on steep, icy slopes. We are going to back them out now and put them in again next winter.


Mark H. - Colorado Springs, CO - April, 2015

HOME CONTACT US VIEW SHOPPING CART COPYRIGHT© 2012 GRIP STUDS® Merlin OR 97532 USA 541-476-1928 |SiteLock
The free script slideshow was provided by JavaScript Kit